PCUS® pro Array

System Features

The PCUS®pro Array ultrasonic frontend is designed to meet requirements of high data acquisition rates and high inspection speeds. In combination with custom software modules, the user can inspect parts and components effectively at high quality levels.

System Characteristics

General

  • USB 2.0 High-Speed with a maximum data transfer rate of 40MB/sec

  • Cabled PCI Express x1 interface; maximum of 200MB/sec data transfer rate 

  • Dimensions: 190mm x 190mm x 65mm (L, W, H)

  • Near-transducer setup

  • Designed for up to 64-element Phased Array transducers

  • Phased Array and/or Sampling Phased Array techniques

  • Can also be used for multi-channel UT applications

Transmitter

  • 64 transmitters

  • Transmitter pulse voltage: -50 to -170V, adjustable in 1V increments 

  • Negative rectangle pulse

  • Output impedance: 50Ω

  • Pulse delay: 0µs - 40µs, adjustable in 0.25ns increments (16 transmitters aperture)

  • Pulse delay: 0µs - 40µs, adjustable in 2.5ns increments (64 transmitters aperture)

  • Pulse width: 10ns - 500ns, adjustable in 2.5ns increments

  • Pulse repetition frequency: up to 2kHz, depending on recording length, pulse width, sampling rate and transmitter voltage

 Receiver

  • Maximum of 16 independent receivers

  • 4:1 multiplexed input for each channel

  • Pulse/Echo mode for Array transducers

  • Frequency range: 500kHz to 30MHz (-3dB)

  • Receiver filter: two analog band filters per channel (user defined)

  • Attenuation/amplification: > 100dB, adjustable in 0.1dB increments

  • TGC with 80dB dynamic range, adjustable in 0.1dB increments; 256 points,
    slope ≤ 40dB/µs, 16 independent TGC curves

  • Receiver delay: 0µs to 655µs, adjustable in 2.5ns increments

  • Input sensitivity: 100μVss

Signal Path

  • Transducer delay: 0μs to 655μs, 10ns increments

  • Maximum recording length: 65,535 samples per channel

  • A/D Converter: 14bit (13bit + sign), up to 100MS/sec

  • One start gate and four measurement gates

  • RF-Data or compressed TD-Data recording

  • Rectification:  positive-, negative- or full-wave

  • Trigger delay per channel: 0µs to 655µs, adjustable in 10ns increments

Interface and Connectors

  • Array transducer connector: Hypertronics NEBV19/16PFD/THA

  • USB 2.0 High-Speed: Bulgin Connector PX0443

  • Molex 74150-001 PCI-Express connector

  • Power consumption: max. 12VDC, max. 48W (30W typical)
    Bulgin Connector PX0419

  • Trigger IN: TTL high or low active; pulse width > 100ns, opto-coupled (Lemo 00)

  • Trigger OUT: LVTTK high active, pulse width > 2.5µs (Lemo 00)

Software

  • Digitally signed drivers for Windows® XP (SP2 or higher), Windows® Vista and Windows® 7 (32bit and 64bit)

  • Managed Windows® API (based on .NET 4.0 framework)

The  PCUS®pro Multi system meets all relevant requirements of DIN EN 12668, Part 1.

Leeb Hardness Tester

WRITE TO US

CONTACT US

Quality Network Pvt Ltd.

Works

Plot No. 09, CGE Colony, Thiruvanmiyur, 
Chennai – 600 041 

Registered Address

#38/GA, Shoreham, 5th Avenue, Besant Nagar, 
Chennai – 600 090

Phone: +91 44 2442 0043
Mob: +91 9444979858
Fax: +91 44 2442 0043

Emailqnet.india@gmail.cominfo@qnetindia.com

NETWORK

USA - Quality Network Inc.

11 Main Street
Sparta, NJ 07871-1979

Phone: +01 (973) 726-8399
Mobile: +01 (973) 699-4460

Email: md@qnetworld.com
Web: www.qnetworld.com

Germany - Q NET Engineering GmbH

Altenkesselerstrasse 17- B6
D-66115 Saarbrücken

Phone: +49 (681) 976-7153
Email: info@q-net.de
Web: www.q-net.de

Visitors

Copyright © 2017 - 2018 Quality Network India Pvt Ltd.